Paper ID

Material Science

Page no.

MS-19

Preparation and Characterization of Polymer Concrete from Unsaturated Polyester Resin Reinforced with Building Waste

Muhtasim Kader Mukit (NSTU, Noakhali, Bangladesh), Md. Abdul Gafur (NSTU), Muhammed Yusuf Miah (NSTU), Md. Kamruzzaman (NSTU)

90

MS-22

Effect of Saw Dust on the Physical and Mechanical Properties of China Clay Refractory

Abdullah Al Mahmood (RUET, Bangladesh), Mushfiqur Islam (RUET), N. Shahriar (RUET), M.S. Rahman, Tasmia Zaman(RUET), Tauhidul Islam Tushar (RUET)

90

MS-49

Characterization of Tensile Properties in Thermal Modified Cu-Ni Content Al-Si Hypoeutectic Alloy under Different Strain Rates

A. Hossain (Sylhet Gas Fields Limited, Sylhet, Bangladesh), F. Gulshan (BUET, Bangladesh), ASW. Kurny (BUET)

91

MS-50

Tribological (Wear) Properties of Cu/Ni/Cu-Ni Content Al-Si Hypoeutectic Alloys under Dry Sliding Condition

A. Hossain (Sylhet Gas Fields Ltd, Bangladesh), M. A. Gafur (BCSIR, Dhaka, Bangladesh), F. Gulshan (BUET, Bangladesh), ASW. Kurny (BUET)

91

MS-58

A comprehensive review of First Principle Study on Bismuth Ferrite

Md. Fatin Ishtiyaq (BUET, Bangladesh), Utpal Roy (BUET), Hasin Ishraq Tamim (BUET), Azmain Faek Islam (BUET), Ahmed Sharif (BUET)

92

MS-79

Effects of Defects on the Fracture Strength of Hexagonal Boron Nitride

Shahriar Muhammad Nahid (BUET, Bangladesh), Fakhrul Hasan Bhuiyan (BUET), Tawfiqur Rakib (BUET), Satyajit Mojumder (BUET)

92

MS-82

Approximation techniques of stress concentration factor of double notched plate

Md. Shafiul Ferdous (BAUST, Saidpur, Bangladesh), Md. Robiul Islam (BAUST), Md. Hasan Ali (BAUST), Md. Abu Shaid Sujon (BAUST), Sk. Suzauddin Yusuf (BAUST), Md. Rasel Sarkar (BAUST), Robiul Islam Rubel (BAUST)

93

MS-112

Study of Fiber Matrix Bonding Property Enhancement in Terms of Flexural Behavior and Macro Analysis of Fracture Behavior of Borassus flabellifer (Palmyra Palm) Fiber Reinforced Polymer Matrix Composites

Mohammad Tashfiul Amin Chowdhury (BUET, Bangladesh), Md. Aminul Islam (BUET)

93

MS-166

Sustainable Green Materials for Building Construction

Ashik Iqbal (KUET, Bangladesh), Faisal Jahangir Swapnil (KUET)

94

MS-177

Thermal Resistance Approach to Analyze Temperature Distribution in Hollow Cylinders Made of Functionally Graded Material (FGM): Under Dirichlet Boundary Condition

S M Shayak Ibna Faruqui (BUET, Bangladesh), Abul Al Arabi (BUET), M. S Parvej (BUET)

81

MS-184

Measurement of Small Strain Stiffness Parameters of Granular Materials by DEM

Md. Mahmud Sazzad (RUET, Bangladesh), Md. Shariful Islam (RUET), Md. Sumon Hossain (RUET)

82

MS-193

Synthesis and Experimental Investigation of PALF Twill Fabric Reinforced Polyester Biocomposites

Subrata Chandra Das (PTexEC, Pabna, Bangladesh), Debasree Paul (KYAU, Sirajgonj, Bangladesh), Md. Abdullah Al Mamun (MBSTU, Bangladesh), Bidhan Kumer Mitro (MBSTU), M. Tauhidul Islam (KYAU), Mubarak Ahmad Khan (BAEC, Bangladesh)

82

MS-210

Effect of Aspect Ratio on the Micro-Scale Responses of Granular Materials

Md. Mahmud Sazzad (RUET, Bangladesh), Saleha Akter Poly (RUET), Nazia Nowshin Sudipta (RUET)

83

MS-231

Unusually High Thermoelectric Figure of Merit in Monocrystalline Metallic Vanadium Dioxide Nanobeams and Its Potential as a Thermoelectric Material

MD. Samirul Islam (RUET, Bangladesh), Md. Mujahid Ul Islam (RUET), Md. Firojjaman (RUET), Tauhidur Rahman (RUET), Sadat Rafi (RUET)

83

MS-239

Design and Simulation of a Graphene Based Thermoelectric Device

MD. Samirul Islam (RUET, Bangladesh), Md. Nahid Hossan (RUET), Md. Najmul Huda Bijoy (RUET), Tauhidur Rahman (RUET), Md. Mujahid Ul Islam (RUET)

84

MS-260

Investigation of Different Mechanical Properties of Commonly Available Papers

M. W. Akram (RUET, Bangladesh), M. W. Islam (RUET), S. K. Choudhury (RUET)

84

MS-269

Influences of Various Ceramic Oxides on Physical and Mechanical Properties of Zirconia Toughened Alumina (ZTA): A Review

Md. Wahedul Islam (RUET, Bangladesh), Md. Bakhtier khalzi (RUET), Md. Suzauddin (RUET), Nirendra Nath Mustaf (RUET)

85

MS-272

Comparison of Mechanical Properties of Induction Furnace Steel Slag and Electric Arc Furnace Steel Slag as a Replacement of Coarse Aggregate in Construction Materials

Riad Morshed Rezaulm (BUET, Bangladesh), Raihan Atahar (BUET), Tahmeed Bin Tasnim (BUET), ASW Kurny (BUET), Rowshan Momtaz (BUET), Fahmida Gulshan (BUET)

85

MS-276

Influence of Aspect Ratio of Granular Materials on the MechanicalBehavior during Cyclic Loading by DEM

Md. Mahmud Sazzad (RUET, Bangladesh), Tasnim Rahat (RUET)

86