Keynote Lectures

Plenary Session-I

11 December 2015 Friday  10:20 AM - 12:20 PM

Venue :  RUET Auditorium

Chair: Prof. Dr. A. F. M. Anwarul Haque (AUST, Bangladesh)

Co-Chair: Prof. Dr. Sirajul Karim Choudhury (RUET, Bangladesh)

Page no.

KL-01

 Desalination of Seawater: a Source of Freshwater

M.N.A. Hawlader (International Islamic University Malaysia, Malaysia)

16-21

KL-02

A Review of Power Sector by Energy Types in SAARC Countries

Dr. Firoz Alam (RMIT University, Melbourne, Australia)

22-32

Keynote Lectures

Plenary Session-II

12 December 2015 Saturday  8:30 AM - 10:30 AM

Venue :  RUET Auditorium

Chair: Prof. Dr. M. N. A. Hawlader (IIUM, Malaysia)

Co-Chair: Prof. Dr. Md. Shamim Akhter (RUET, Bangladesh)

Page no.

KL-03

Ultra-precision Manufacturing Through Revolutionary Innovation

Prof. Dr. Mustafizur Rahman (NUS, Singapore)

33-45

KL-04

Aerodynamics of Multiple Structures: Wake and Flow-Induced Force

Md. Mahbub Alam (Harbin Institute of Technology, China)

46-56

Paper ID

Technical Session-I

Material Science-I

11 December Friday 2:00 PM-4:00 PM

Venue: GCE Building, Room-A

Chair: Prof. Dr. C. M. Mostofa (RU, Bangladesh)

Co-chair: Prof. Dr. Md. Shamimur Rahman (RUET, Bangladesh)

Page no.

MS-01

Improvement of the Mechanical Properties of Titania stabilized Alumina Ceramic Cutting tool

Abu Naser Rashid Reza (GIST, Korea) Tashneem Ara Islam(Rhine-Waal University of Applied Science, Germany) Arman Hussain (BUET, Bangladesh)Md. Fakhrul Islam (BUET) Md. Mohar Ali Bepari (BUET)

101

MS-04

Design Consideration & Cost Optimization on Proper Choice of Material of Re-entry Vehicle

Afsani Kashem Prokrity (MIST, Bangladesh) K.M. Atiq Adnan (MIST) Nadia Mahmud (MIST) Imrul Islam (MIST)

101

MS-05

Wear Behaviors of Micron Size Graphite Particle Reinforced Nylon Composite

Ayesha Akter (BUET, Bangladesh) M.A. Islam (BUET)

102

MS-08

Prospect of Mild Steel as CNG Auto Rickshaw Drive Shaft

M. E. Hoque (RUET, Bangladesh) Robiul Islam Rubel  (RUET) Md. Jafor Iqball  (RUET) Md. Kamal Uddin  (RUET)

102

MS-09

Effect of Fiber Length on Tensile Properties of Jute Fiber Composite

Nafis Iqbal (BUET, Bangladesh) M.A. Islam (BUET)

103

MS-13

Effect of Micro-Nano Particle Size Admixture on the Properties of Alumina

Manira Akter (BUET, Bangladesh) Rahin Sifat (BUET) A.K.M.Bazlur Rashid (BUET)

103

MS-16

Utilization of Sugarcane Bagasse Ash for Manufacturing Ceramic Products

Mst. Shanjida Sultana  (BCSIR, Bangladesh) Aninda Nafis Ahmed  (BCSIR)

104

MS-17

Analysis of the Physico-Mechanical Properties of Jute Polypropylene Blended Yarn

Md. Reajul Islam  (BUTex, Bangladesh) Hosne Ara Begum  (BUTex)

104

MS-18

 Review of Computational Homogenization of Materials

Md. Mahabub Hasan Mousum (RUET, Bangladesh) A.M. Rahman  (KIT, Germany) Nauman Ehsan Hashmi (NUST, Pakistan) Muhammad Shahid Khan (NUST)

105

Paper ID

Technical Session-II

Applied Mechanics

11 December Friday 2:00 PM-4:00 PM

Venue: GCE Building, Room-B

Chair: Prof. Dr. Md. Mahbub Alam (HIT, China)

Co-chair: Prof. Dr. Md. Emdadul Hoque (RUET, Bangladesh)

Page no.

AM-01

Sound Source Recognition For Intelligent Surveillance

Md. Rokunuzzaman (RUET, Bangladesh) Lutfun Nahar Nipa (RUET) Tamanna Tasnim Moon (RUET) Shafiul Alam (RUET)

58

AM-02

Effect of Feedforward Control on the Dynamics of a Zero-Power Controlled Zero-Compliance System

M. M. Zaglul Shahadat (SU, Japan) T. Mizuno (SU) Y. Ishino (SU) M. Takasaki (SU)

58

AM-05

Nonlocal Elasticity Theory for Lateral Torsional Buckling of Nanobeam

M. Zahurul Islam (RU, Bangladesh)

59

AM-08

Automatic Exploration of Object from Partial Region of Interest (ROI)

Md.Rokunuzzaman (RUET, Bangladesh) S. Mandal (RUET) Md. Kamrul Islam(RUET) Basu Deb (RUET)

59

AM-10

Robotic Path Planning Algorithm as a Tool of Visualization of Characteristic Differences among Particle Swarm Optimization, Artificial Bee Colony Algorithm and Firefly Algorithm

Md. Tajmiruzzaman (RUET, Bangladesh) Md. Al-Mamun (RUET)

60

AM-12

Design and Development of a Mind-controlled Prosthetic Hand Using Electroencephalography Sensor

A H Khan (BUET,Bangladesh) I Khan (BUET)  M A R Sarkar (BUET)

60

AM-17

Vibration Monitoring and Condition Analysis of a 210MW Steam Turbine

I. Ahmed (BUET, Bangladesh) R. Islam(BUET) M.A.R. Sarkar (BUET) Ziaul Haq (BPDB, Bangladesh)

61

AM-19

Design, Simulation and Construction of an Automatic Wheelchair

Hasnayen Ahmed (KUET, Bangladesh) Kazi Ehsanul Karim (KUET) Helal-An-Nahiyan(KUET)

61

AM-22

Identification of the location of any obstacle ahead of a running vehicle in a foggy and drowsy environment

Efat A. Haque (RUET, Bangladesh) Jannatul J. Juthy (RUET) Nirendra N. Mustafi ( RUET)

62

AM-23

Design and Construction of a Remote Controlled Fire Extinguishing Robot

Md. Rokunuzzaman  (RUET, Bangladesh) Md. Sharif Ahmed (RUET) Mustafa Muhibullah (RUET) Sourav Sarker (RUET) Md. Khursid Alam  (RUET) Md. Sanower Hossain  (RUET)

62

AM-24

MMS Based Car Security System

Utsha Barua (CUET, Bangladesh) Mohammed Badsha Alamgir (CUET) Mohammed Liaket Ali  (CUET)

63

Paper ID

Technical Session-III

Energy Technology-I

11 December Friday 2:00 PM-4:00 PM

Venue: GCE Building, Room-C

Chair: Prof. Dr. Mohd. Rafiqul Alam Beg (RUET, Bangladesh)

Co-Chair: Dr. Altab Hossain (MIST, Bangladesh)

Page no.

ET-01

Construction and Performance Study of Underground Assisted Air Heating and Cooling System

Md. Shazib Uddin  (RUET, Bangladesh) Mahadi Hasan Masud (RUET) S. Mandal (RUET) M. Morshed (RUET)

65

ET-03

NGV Safety and Regulatory Regime -Challenges in Bangladesh

Robiul Islam Rubel (RUET, Bangladesh)

65

ET-05

Feasibility Analysis of Eco-Friendly Municipal Waste Management in Khulna City

Debasish Adhikary (KUET, Bangladesh) Md. Shahidul Islam (KUET)

66

ET-07

Implementation of a Solar Powered Desiccant Air Conditioning System

Shaikh Sumit Noor (RUET, Bangladesh)  Al-Barkat Mehedi (RUET) Fazla Hossain Mohaimen (RUET)

66

ET-08

Feedstock to Oil Energy Conversion Efficiency in Pyrolysis of Organic Wastes: An Up to Date Review

M.S. Hossain (RUET, Bnagladesh) M.R. Islam (RUET) N.N. Mustafi (RUET) H. Haniu (KIT, Japan)

67

ET-09

Simulation of a Fluidized Bed Reactor Using Computational Fluid Dynamics

M. M. Hassan (SDSU, USA) K.M Rahman (SDSU) Caitlin R. Gerdes (SDSU)Amit Roy (RUET)  Stephen P. Gent (SDSU)

67

ET-10

A Complete Off-Grid PV-Diesel-Battery Hybrid Energy System with Feasibility Analysis, System Modeling and Optimization

SK. A. Shezan (University of Malaya, Malaysia) A.Hossain (MIST, Bangladesh) A. Ishrak (BRAC University, Bangladesh)

68

ET-11

Experimental Study of a Low Temperature Organic Rankine Cycle for Small Scale Power Generation

Md. Arafat Islam (MIST, Bangladesh) Ashfaq Ahmad Shoaib (MIST) Mohammad Asaduzzaman Asif (MIST) Mir Sakib Mustashin (MIST) Tahmidur Rahman (MIST)

68

ET-17

Water Heating and Drying using Solar Energy and Air-Con Waste Heat

Zohra Begum Hameed Sharieff (IIUM, Malaysia) M N A Hawlader (IIUM) Sany Izan Ihsan (IIUM)

69

ET-18

Electricity Generation from Poultry Waste in Bangladesh

Md. Wahiduzzaman Sajib (RUET, Bangadesh)  Mehadi Hassan (RUET) S.M. Najmul Hoque (RUET) M. Mourshed (RUET)

69

ET-21

Safety Issues of Boiling Water Reactors

M. Obaidullah (BUET, Bangladesh) I. Ahmed (BUET) M. A. R. Sarkar (BUET)

70

Paper ID

Technical Session-V

Fluid Mechanics

11 December Friday 4:15 PM-7:00 PM

Venue: GCE Building, Room-B

Chair: Prof. Dr.  Firoz Alam  (RMIT, Australia)

Co-chair: Prof. Dr. Md. Mahbub Alam (HIT, China)

Page no.

FM-01

Energy Consumption Scenario of Submersible Pumps Using in the Barind Area of Bangladesh

M. E. Haque  (RUET, Bangladesh) M. R. Islam (RUET)  J. Ferdous  (RUET) M. S. Akhter  (RUET) H. Haniu (KIT, Japan)

77

FM-02

Free Convection Heat & Mass Transfer on Steady MHD Boundary Layer Flow over a Hot Stretching Plate with Hall Current and Heat Generation

M. Ali (CUET, Bangladesh) M. A. Alim (BUET,  Bangladesh) M. S. Alam (CUET)

77

FM-06

CFD Simulation and Analysis of a UAV

Arif Alam (MIST, Bangladesh) Mahmud Hossain (MIST) Md. Sirajul Islam (MIST) Md. Azizullah Khan (MIST)

78

FM-07

Comparative Study of Tara Dev and Hybrid Tara Pump with Respect to Water Level in Rajshahi

S. S. Tuly (RUET, Bangladesh) M.S. Zaman (RUET) M.R. Islam (RUET)

78

FM-08

Numerical Investigation of Aerodynamic and Structural Performance of a Centrifugal Compressor

Roohany Mahmud (MIST,  Bangladesh) Rofiques Salehin (MIST) S A Savanur (MIST)

79

FM-09

Mechanism of Flow-Induced Vibration of a Cylinder in Wakes

B. Qin (HIT, China) Md. Mahbub Alam  (HIT) Y. Zhou (HIT)

79

FM-11

Experimental Investigation of Lubrication by Wax Dissolved in Chemical Lubricant

Samira Ishrat Jahan (KUET, Bangladesh) Sobahan Mia (KUET)

80

FM-13

Experimental Studies on Heat Transfer and Friction Factor in a Turbulent Flow through a Smooth Square Duct

A.K.M. Abdul Hamid (RUET, Bangladesh) M.A. Taher Ali (BUET, BAngladesh) A. R. Akanda (Sonargaon, University, Bangladesh) M. Riaz Pervez (RUET)

80

FM-14

Development of a Pump Test Bed

M. E. Haque (RUET, Bangladseh) M. R. Islam (RUET) M. M. Islam (RUET) A. Roy (RUET)  H. Hainu (KIT, Japan)

81

FM-15

Thrust Produced by Four Fingers of a Swimmer at a Low Re

Md. Mahbub Alam (HIT, China) Guoqing Xu (KIT) Kerry Hourigan (Monash University, Australia) Shafiqur Rehman (KFUPM, Saudi Arabia)

81

FM-18

Experimental and Numerical Measurement of Lift and Drag Force of NACA 0015Aerofoil Blade

Md. Kamal Uddin (RUET, Bangladesh) Md. Zahidul Islam (RUET) Md. Rokunuzzaman (RUET) Robiul Islam Rubel (RUET)

82

Paper ID

Technical Session-IV

Related Technology

11 December Friday 4:15 PM - 7:00 PM

Venue: GCE Building, Room-A

Chair: Prof. Dr. Syed Abdul Mofiz (RUET, Bangladesh)

Co-chair: Prof. Dr. Md. Shamsul Alam (RUET, Bangladesh)

Page no.

RT-01

Analysis of Approximate Solutions of Initial Value Problems (IVP) for Ordinary Differential Equations (ODE)

Md. Amirul Islam (Uttara University, Bangladesh) S.M. Kamal Hossain (Uttara University)

111

RT-02

Promote Sustainable and Healthy Environment of Rajshahi City Corporation through Effective Management of Solid Waste

Mst. Ilme Faridatul (RUET, Bangladesh) Nashid Rahman Niloy  (RUET) Md. Salman Reza  (RUET)

111

RT-04

Qualitative behavior of the discrete equilibrium solutions of the Boltzmann equation with respect to the parameters

S.M. Kamal Hossain  (Uttara University, Bangladesh) Laek. S. Andallah  (Jahangirnagar University, Bangladesh)

112

RT-09

A Study on the Effect of Textile Effluents and Best Effective Effluent Treatment Plant in Bangladesh Textile Industry

Farhana Momotaz (KUET, Bangladesh) Md. Rashedul Hasan  (College of Fashion Technology and Management, Bangladesh)

112

RT-15

“Gulshan Lake- an area of concern, probable threats and extreme consequences”- A case study

A.K.M Sarower Kabir  (AUST, Bangladesh) Md. Shaukat-Ul- Islam (IUB, Bangladesh)

113

RT-18

A Feasibility Study of Synthesizing Zeolitic Material from Locally Available Waste Materials

Md. Shadman Akif (BUET, Bangladesh) Nowrin Shahriar (BUET) Kazi Bayzid Kabir (BUET)

113

RT-28

Effect of Material Model on the FEM Based Stability Analysis of Slope

M. M. Sazzad  (RUET, Bangladesh) A. A. Mamun(RUET) F. I. Rahman  (RUET)

114

RT-32

Investigation of Bodyweight Distribution on Metatarsophalangeal Joint of Human Foot for Ladies High Heel Footwear

Md. Abu Sayeed (KUET, Bangladesh) Sk. Mohammed Ali Rony (KUET) Md. Samsul Arefin (KUET) Md. Bashir Uddin (KUET)

114

RT-33

Characterization of Textile ETP Sludge to Assess Heavy Metals and Their Environmental Impact Assessment

Shamima Nasrin (KUET, Bangladesh) Md. Mahadi Hassan (KUET) Md. Abul Hashem (KUET) Md. Mazharul Islam (KUET)

115

RT-44

A Finite Element Analysis to Design and Simulation of Effective Shank Piece in Ladies High Heel Shoe

Nil Ratan Mondal (KUET, Bangladesh) Md. Minar Ahmed (KUET) Md. Samsul Arefin (KUET) Mahabub Hasan Rony  (KUET)  

115

RT-49

Design and Optimization of a Long Range Jet Aircraft

Md. Afzal Hossain (MIST, Bangladesh) Md. Abdus Salam (MIST) Md. Rayhan Afsar(MIST) Kh. Md. Faisal(MIST) M. A. Taher Ali (MIST)

116

RT-62

Consumption behavior of water: A case study of Chittagong City

Liton Chandra (CUET, Bangladesh) Binoy Debnath (PCU, Bangladesh) Asiful Hoque (CUET, Bangladesh)

116

RT-65

Conceptual Study and Analysis of Neutron Diffusion and Moderation in Nuclear Reactor

T. Mollik (BUET, Bangladesh) M.M. Hossain (BUET) S Hasan (BUET) M.A.R. Sarkar (BUET) M.A. Zulquarnain (BAERE, Bangladseh)

117

RT-67

Survey on Socioeconomic Impact of Battery Operated Auto Rickshaw in Jessore City

K. M. Rezwan Kabir (JUST, Bangladesh) Sabrin Arefin (JUST) P. K. Halder1(JUST) N. Paul (BUET, Bangladesh) M. E. Hoque (RUET, Bangladesh)

117

Paper ID

Technical Session-VI

Industrial Engineering-I

11 December Friday 4:15 PM-7:00 PM

Venue: GCE Building, Room-C

Chair: Prof. Dr. A F M Anwarul Haque (AUST, Bangladesh)

Co-Chair: Prof. Dr. Md. Mosharraf Hossain (RUET, Bangladesh)

Page no.

IE-01

Production Inventory System with Different Rates of Production Considering Poisson Demand Arrivals

Mohammad Ekramol Islam (Northern University, Bangladesh) K.M. Safiqul Islam (NU) Md. Sharif Uddin (Jahangirnagar University)

84

IE-04

Study of Process Parameters and Optimization of Process Variables for the Production of Urea by Using Aspen HYSYS

Sadia Sikder (BUET, Bangladesh) Sadiya Afrose (BUET) Md. Ruhul Amin (BUET)

84

IE-05

Inventory system at service-facility with N-policy consider reneging and rejection of pool customers

Mohammad Ekramol Islam (Northern University, Bangladesh) Shahansha khan (Uttara University, Bangladesh)

85

IE-06

A Production Inventory Model for Different Classes of Demands with Constant Production Rate Considering the Product’s Shelf-Life Finite

Mohammad Ekramol Islam (Northern University Bangladesh) Shirajul Islam Ukil (Jahangirnagar University, Bangladsh) Md Sharif Uddin (JU)

85

IE-08

Analyzing and Developing the Quality Control System of a Renowned Battery Industry, Bangladesh: A Case Study

Subrata Talapatra (KUET, Bangladesh) Md. Naziat Hossain (KUET)Md. Rashedul Haque (KUET)

86

IE-09

Technical study of the effect of CO2 Laser surface engraving on the physical properties of denim fabric

Joy Sarkar (KUET, Bangladesh) Elias Khalil (WUB, Bangladesh) Md. Arifur Rahman (WUB)

86

IE-10

Demand Forecasting of Power Thresher in a Selected Company

Syed Misbah Uddin (SUST, Bangladesh) Kawsar Ahmed (SUST) Gulam Saniath Subhane (SUST)

87

IE-11

An Approach to Enhance the Sigma Level in Cable Industry by Using QC Tools and DMAIC Methodology: A Case Study

Pritom Kumar Mondal,(KUET, Bangladesh) Md.Ferdaus Hasan (KUET) Md. Zamiul Islam (KUET)

87

IE-16

Android Application Based MIS to Monitor and Manage Students Attendance  

Md. Badiuzzaman (KUET, Bangladesh) Md. Shahinur Alam (JUST, Bangladesh)

88

IE-19

Defects Reduction in Casting Process by Applying Six Sigma Principles and DMAIC Problem Solving Methodology (A Case Study)

Md. Abdur Rahman (KUET, Bangladesh) Subrata Talapatra (KUET)

88

IE-20

Optimization of Cutting force in Turning AISI 1040 Steel: Using Taguchi Orthogonal Array and Genetic Algorithm

Md. Ariful Islam (RUET, BAngladesh) Mahbubur Rahaman (RUET) Porag Kumar Sharma (RUET)

89

IE-21

Performance Evaluation of a Supply Chain Network Distinctly by Some New Flexibility Indexes with the Real-World Applicability: A Case Study

Md. Al-Mamun (RUET, Bangladesh) Md. Tajmiruzzaman (RUET)

89

IE-23

Best Supplier Selection Using Analytical Hierarchy Process (AHP) of a Furniture Industry in Bangladesh

Md. Golam Rabbani (RUET, Bangladesh) Md. Rasel Sarkar (RUET)

90

IE-25

Renovation of Automation with Human Resources in Industrial Sector in Bangladesh

A. S. M. Shamsuzzaman (RUET, Bangladseh) P. K. Halder (RUET) A.S.M. Mojahidul Hoque (RUET) M. T. Islam (KUET, Bangladesh) M. E. Hoque (RUET)

90

IE-28

Ready-Made Garment (RMG) Industry in Bangladesh: Economic Contribution and Potentiality

Md. Al-Mamun (RUET, Bangladesh) Md. Tajmiruzzaman (RUET) Md. Asadujjaman (RUET)

91

Paper ID

Technical Session-VIII

Thermal Engineering

12 December Saturday 10:50 AM - 1:15 PM

Venue: GCE Building, Room-B

Chair: Dr. Ali Ahsan Talukder (Ex-Faculty, RUET, Bangladesh)

Co-chair: Prof. Dr. Nirendra Nath Mustafi (RUET, Bangladesh)

Page no.

TE-01

Non-isothermal Heating and Magnetic Field Effect on Non-Newtonian Power Law Fluid in Triangular Channel

Sourav Das (BUET, Bangladeh) Tawfiqur Rakib (BUET) Khan Md. Rabbi (BUET) Satyajit Mojumder (BUET) Sourav Saha (BUET)

119

TE-02

Effect of magnetic field on natural convection in a rectangular enclosure with thin fin attached and having Cu-water nanofluid inside

Moinuddin Shuvo (BUET, Bangladesh) Rabiul Hasan Kabir (BUET) Khan Md. Rabbi (BUET) Satyajit Mojumder (BUET) Sourav Saha (BUET)

119

TE-04

Pure Mixed Convection inside Square Ventilated Cavity Containing Rotating Adiabatic Cylinder: Influence of Working Fluid

Mir Jalal Ahmad (BUET, Bangladesh) Nandita Chakrabarty Jhumur (BUET) Sourav Saha (BUET) Satyajit Mojumder (BUET) Khan Rabbi (BUET)

120

TE-05

Natural convection in circular headed cavity with discrete bottom heat sources filled with Ferro-fluid

Anwarul Karim (BUET, Bangladesh) Asif Reza Chowdhury (BUET) Khan Md. Rabbi (BUET)

120

TE-07

Production, Characterization and Performance Study of Cottonseed Biodiesel in a Diesel Engine

Md. Wahedul Islam (RUET, Bangladesh) Mafia Naher Afroj (RUET) Romana Jannat (RUET)

121

TE-08

Finite Element Analysis of Bio-heat Transfer Problems with Different Heating Condition on Skin Surface

Abul Mukid Mohammad Mukaddes (SUST, Bangladesh) Sannyal Mridul (SUST, Bangladesh)

121

TE-10

Double Diffusive Natural Convection in a Porous Wavy Triangular Enclosure Filled with Nanofluid in Presence of Magnetic Field

R. Chowdhury (Stamford University Bangladesh & BUET, Bangladesh) S. Parvin (BUET) M. A. H. Khan (BUET)

122

TE-11

3D Finite Element Analysis for Heat Transfer in a Solar Collector: Effect of Solar Irradiation

Rehena Nasrin (BUET, Bangladesh) Salma Parvin (BUET) M.A. Alim (BUET)

122

TE-12

Natural convection in a nanofluid filled prismatic cavity with non-isothermal bottom wall

Salma Parvin (BUET, Bangladesh) Rehena Nasrin (BUET) Raju Chowdhury  (BUET, Stamford University Bangladesh)

123

TE-13

Study of Free Convection Heat and Mass Transfer about a Semi-Infinite Vertical Plate with Heat Absorption and Chemical Reaction in Presence of Magnetic Field

M. S. Alam (CUET, Bangladesh) M. Ali (BUET, Bangladesh) K. A. Rahman (CUET)

123

TE-17

Temperature Distribution and Thermal Comfort Analysis of a Shoe for summer and Winter Season Using CFD Technique: Bangladesh Perspective

Md. Samsul Arefin(KUET, Bangladesh) Md. Rafiul Hashaz (KUET) Abu Jor (KUET)

124

Paper ID

Technical Session-IX

Energy Technology-II

12 December Saturday 2:00 PM-4:00 PM

Venue: GCE Building, Room-A

Chair: Prof. M.N.A. Howlader (IIUM, Malaysia)

Co-Chair: Prof. Dr. Md. Shamim Akhter (RUET, Bangladesh)

Page no.

ET-26

Impact of battery driven vehicle on the electricity of Rajshahi city, Bangladesh

S. Mandal (RUET, Bangladesh) S. Ahmed (RUET) F. Rabbi (RUET)

70

ET-29

Evaluation of Biodiesel from Rice Bran Oil as a Fuel for Automotive Applications

Abu Naushad Parvez (KUET, Bangladesh) Sobahan Mia (KUET)

71

ET-30

Seismic Design Considerations for Nuclear Power Reactors

M.A.R. Sarkar (BUET, Bangladesh) I. Ahmed (BUET) R. Islam (BUET) M ALI Zulquarnain  (BUET)

71

ET-32

Analysis of Speed Breaker Mechanism for More Effective Electricity Generation

Md. Rokonuzzaman (MIST, Bangladesh) Md. Hossam-E-Haider (MIST)

72

ET-39

Study and Construction of Evacuated Tube solar Collector

Tasnuva Tabassum Choudhury (RUET, Bangladesh) Md. Faisal Faruk (RUET) Morshed Alam (RUET)

72

ET-44

Design, Construction and Performance Test of a Solar Powered Prototype Vehicle

Md. Shazib Uddin (RUET, Bangladesh) S. Mandal (RUET) Mahadi Hasan Masud (RUET) M. Mourshed(RUET)

73

ET-45

Diversification of Rural Energy Consumption Pattern in Bangladesh: A Case Study

P. K. Halder (JUST, Bangladesh) N. Paul (BUET, Bangladesh) Sabrin Arefin (JUST) K. M. Razwan Kabir (JUST) M. R. A. Beg  (RUET, Bangladesh)

73

ET-46

Experimental Investigation of a Hybrid Evacuated Tube Solar Collector

J Ferdous (RUET, Bangladesh) M R A Beg (RUET) M R I Sarker (RUET)

74

ET-47

Maximum Utilization of Solar Radiation in a Solar Air Heater Combined with Solar Cells by Concave Lens

Md. Sazan Rahman (RUET, Bangladesh) Md.  Saiful Islam (RUET) Najmul Hoque (RUET) Mohd. Rafiqul Alam Beg (RUET)

74

ET-49

Design & Construction of a Pyrolysis Reactor for Liquid Oil Production from Olive Seeds

M. M. Hassan (SDSU, USA & RUET, Bangladesh) M.Perves (RUET) M.J. Alam (RUET) Amit Roy (RUET) Md. Nurun Nabi (RUET)

75

ET-50

Performance Comparison of Four Potential Seed Oil as a Feedstock for Bio-Diesel Production in Bangladesh

N. Hoque (RUET, Bangladesh) M. Mourshed (RUET) M. R. A. Beg (RUET) B. K. Das (RUET)

75

Paper ID

Technical Session-X

Material Science-II

12 December Saturday 2:00 PM-4:15 PM

Venue: GCE Building, Room-B

Chair: Prof. M. Shahidur Rahman (RU, Bangladesh)

Co-chair: Prof. Dr. Md. Abbas Ali (RUET, Bangladesh)

Page no.

MS-19

Influence of Additive on the Microstructure and Properties of Multiferroic BaTiO3

Tasmia Zaman (RUET, Bangladesh)  Sharmin Mostari (RUET) Md. Fakhrul Islam  (BUET, Bangladesh)

105

MS-20

Mechanical Characterization of Waste Polyester Fiber Reinforced Polypropylene Composites

Md. Abdul Aziz Antor  (BUET, Bangladesh) Md. Ashif Anwar  (BUET) Ahmed Sharif   (BUET) M.A. Gafur (BCSIR) Aninda Nafis Ahmed  (BCSIR) Sajib Aninda Dhar (BCSIR)

106

MS-23

An Analysis on the Sustainability of Different Outsole Materials during Shoe Flexing Using FEA Method

Md. Ibnul Hasan  (KUET, Bangladesh) Taufiq Rashid (KUET) Md. Samsul Arefin (KUET)

106

MS-25

Effect of carburizing time and wear properties on carburized heat treated Chromium (Cr) and Nickel-Chromium (Ni-Cr) steel.

Md. Iqbal Hossain  (BUET, Bangladesh) Md. Mohar Ali Bepari  (BUET) Kazi Md.Shorowardi  (BUET)

107

MS-26

Effects of P2O5 Addition and Sintering Temperature on Structural Properties of Silica

Manzila Islam Tuheen  (BUET, Bangladesh) Anika Benozir Asha  (BUET) A. H. M. Azadur Rahman (BUET) Md. Arifur Rahman Khan  (BUET) Md. Miftaur Rahman  (BUET)

107

MS-28

Influence of Lanthanum doping on the Crystallite Growth and Dielectric Properties of Barium Titanate (BaTiO3) Ceramics

Masum Billah  (BUET, Bangladesh)  Adnan Adib Ahamed  (BUET) Aungkan Sen  (BUET) Md. Miftaur Rahman  (BUET)

108

MS-30

LIPCA in the Development of Shape Changing Aerial Vehicle

Md Rejwanul Haque  (MIST, Bangladesh) Bodiuzzaman Jony  (MIST) Md. Mobassir Hossain (MIST) Debanan Bhadra (MIST) Kh. Nusaiba Hafiz  (MIST) Md. Abdus Salam (MIST)

108

MS-34

Effect of Rice Husk Ash Amounts and Sizes on the Properties of Normal Clay Bricks

Seefat-E-Anjum (BUET, Bangladesh), Sabrina Binte Ashraf  (BUET)  Sadia Momtaz Sorna (BUET) Rezaul Haque  (BUET)

109

Paper ID

Technical Session-VII

Industrial Engineering-II

12 December Saturday 10:50 AM-1:15 PM

Venue: GCE Building, Room-A

Chair: Prof. Dr. Mustafizur Rahman (NUS, Singapore)

Co-Chair: Prof. Dr. Md. Rokunuzzaman (RUET, Bangladesh)

Page no.

IE-29

Flow Sheet Development and Simulation with Optimization of Industrial Scale Natural Gas Processing Plant by Using Aspen-Hysys

Md.Nurus Sakib (BUET, Bangladesh) Noor Mohammad (BUET)  Niloy Barua (BUET) Md Ruhul Amin (BUET)

91

IE-30

Modeling and Optimization of Aggregate Production Planning by Time-varying Acceleration Coefficients PSO

Md. Sahab Uddin (RUET, Bangladesh) Sayed Rezwanul Islam (RUET) Md. Mahmudul Hasan (RUET)

92

IE-31

The Implementation of Different Forecasting Techniques for Demand Forecasting in Jute Product Section in Bangladesh

P. K. Halder (JUST, Bangladesh) S. K. Biswas (JUST) M. T. Islam (JUST) M. R. A. Beg (RUET)

92

IE-34

Optimization of Turning Parameters for Cutting Force and Chip Thickness Ratio in Dry Turning Process: An Experimental Investigation

Shahed Mahmud (RUET, Bangladesh) Khan Mohaimanul Islam (RUET) Md. AhasanHabib (RUET) Md. SanowarHossain  (RUET) Md. Mosharraf Hossain (RUET)

93

IE-35

Solving a Transportation Problem of a Typical Dairy Firm Considering Fuzzy Environment

Nadia Tanzeem (RUET, Bangladesh)) Md. Mohibul Islam (RUET) Nusrat Jahan (RUET)

93

IE-36

The Importance of the Information Technology Application on Supply Chain Management

Sudipta Kumar Saha (KUET, Bangladesh) Bikram Dey (KUET)

94

IE-38

Study on the Effects of Back Rest Roller Height of Warp Yarn Breakages with Asymmetric Sheds

Kazi Sowrov (BUTex, Bangladesh) Mashud Ahmed (BUTex) Mahbubul Hauque (Daffodil International University)

94

IE-44

Optimal procurement strategy for uncertain demand situation and imperfect quality by genetic algorithm

Md. Sanowar Hossain (RUET, Bangladesh) Nur-E-Zannat (RUET) Umme Aftahaune Mohana (RUET) Md. Mosharraf Hossain (RUET)

95

IE-45

Analysis of the effects of shed crossing timing angle on the pick density of woven fabrics

Kazi Sowrov (BUTex, Bangladesh) Mashud Ahmed (BUTex)  Mahbubul Hauque (Daffodil International University, Bangladesh)

95

IE-46

A Comparative Analysis of Heuristics for Optimizing the Makespan in Flow Shop Scheduling

Dewan Sabbir Ahammed RAYHAN (RUET, Bangladesh), Samiran CHAKMA(RUET)

96

IE-47

Present Scenario and Possible Scope of Film Industry: A Case Study on Bangladeshi Film (Dhallywood)

Shahed Mahmud  (RUET, Bangladesh) Md. Golam Rakib (RUET) Md. Imran Rahman (RUET) Md. Mosharraf Hossain (RUET)

96

IE-48

Minimizing Make span for Flow Shop Scheduling using Matrix Manipulation and Heuristic methods under processing uncertainty

Md. Asaduzzaman (RUET, Bangladesh) Aninda Saha (RUET) Md. Sanowar Hossain (RUET) Shahed Mahmud (RUET)

97

IE-49

An Evaluation Of Failure Modes And Effect Analysis For A Battery Manufacturing Industry

Md. Abdus Salam (GildanActivewear, Bangladesh), Md Mashum Billal (RUET, Bangladesh),Md. Moshiur Rahman (Dutch-Bangla pack Ltd., Bangladesh) Md. Ariful Islam(RUET)

97

IE-50

Statistical Process Control (SPC) Tools for Minimizing the Moulding Defects in Spun Pre-stressed Concrete Electric Pole Production

Md. Asadujjaman (RUET, Bangladseh) Md. Safiul Kabir (RUET) Md. Arifuzzaman (RUET) Md. Mosharraf Hossain (RUET)

98

IE-51

Constructing a Virtual Factory Using 3d Studio Max

H.A. Zafor (SUST, Bangladesh)  J.C. Dhar (SUST) Santa Saha (SUST) Syeda Kamrun Nahar (SUST) M. Iqbal (SUST)

98

IE-52

Automatic Whiteboard Cleaner Using Microcontroller Based Rack and Pinion Mechanism

Sonia Akhter (RUET, Bangladesh)  Anindo Saha (RUET) Md. Rayhan Parvez Koushik (RUET)  Md. Asaduzzaman (RUET) Razoana Islam Shorna (RUET) Md. Moudud Ahmed (RUET)

99

IE-53

Safety Audit in a Milk Industry of Bangladesh

Md Mamunur Rashid (BIM, Bangladesh)M. Iqbal (SUST, BAngladesh)Md. Mossarrof Hossain

(BMCUL, Bangladesh) Mokbul Hossain (BMCUL) Md Mostafizur Rahman (BMCUL)

99